null
  Loading... Please wait...

Built To Last

Only the very best spas have all these quality features.

The thickest, strongest shells available

Our 6-layer laminated “tough bond” shells are one of the thickest shells available (8-10mm thick), and our oven curing process ensures your shell is as strong as possible. If you shop around, be sure to check the thickness of the spa shell.

THE THICKEST, STRONGEST SHELLS AVAILABLE

 

triple-reinforced-frames-.jpgTriple re-inforced frames for strength

Our “tough built” treated timber frames have triple reinforced corners, cross-bracing and supports under every seat. The entire frame is then protected by chemical treatment, paint and a wrap-around base.

Our Whitehaven Spa and all Swim Spas have a galvanised steel frame for extra strength.

 

 

 


base-.jpg

Our insulated fibreglass wrap-around base adds strength and stops pests and moisture.

Every Oasis Spas has a sealed wrap-around base to stop weather, pests, and cold air getting inside the cabinet and damaging your spa. This range includes a solid fibreglass base that adds extra strength and insulation to your spa.

 

 

 

 

Our "no flex" construction stops stress on the shell.

For maximum strength and long shell life, we’ve designed a 3-stage “no flex” construction to lock the shell, frame, and fibreglass base together and form one super strong cross-braced structure. Then we added seat supports for even more strength. Nothing can flex, so there’s never any stress on the shell.

Our

 

 

Better components for longer life

swim-jet-.jpgJets that are built to last

Most brands of jets are made from a type of soft plastic that breaks down in time due to damage from spa chemicals. This causes the clips that hold these cheaper jets in place to become brittle and break. And the bearings that make them spin often fall apart after a few years.

Our “aqua-ssage” jets are made from hard PVC (with stainless steel trims), which won’t deteriorate. They have a screw-in mechanism (no clips to break), and they spin on a floating stainless steel spindle (so there are no bearings to fall out).

 

 

 

 

Our heaters won't rust or calcify. heaters-.jpg

Oasis Spa heaters use 316 stainless steel housings and teflon-coated Incalloy elements for the ultimate protection against calcium build-up and corrosion by water and chemicals, ensuring long life and maximum performance.

 

 

 

 

 

fittings-.jpgBetter quality fittings and headrests

RD technologies provide high quality components that are used in premium spas worldwide. Every component is designed for maximum performance, functionality, and durability to ensure they stand the test of time.

 

 

 

 

 

Superior components for longer life components-.jpg

Only the best components and materials are used to build an Oasis Spa – including pumps and control systems from Spa Net Australia, German Silicones, and American acrylic.

 

 

 

 

 

 

pumps-.jpgSuper reliable pumps

Our massage pumps are built to last, and our filtration pumps use a smaller, specially designed impellor to reduce stress on the motor, cutting power consumption and significantly increasing pump life.

 

 

 

 

 

 

Food grade jet hoses for your safety food-grade-.jpg

Most spas do not use “food grade” hose for their jet plumbing. This is dangerous, as the chemicals in this cheaper type of hose will seep into the water, which you then absorb through your skin. Our clear “food grade” hose is specifically designed for use in chemically treated hot water and won’t kink or deteriorate. Most importantly, you won’t be soaking in potentially dangerous chemicals.

 

Revesby Store

15/133 The River Rd
Revesby, NSW 2212

(02) 8069 4799

Opening Hours
Weekdays: 9am - 5pm
Saturday: 9am - 4pm
Sunday: 10am - 3:30pm

Narellan Store

Unit 2/ 6 Porrende Street
Narellan, NSW 2567

(02) 4647 4288

Opening Hours
Weekdays: 9am - 5pm
Saturday: 9am - 4pm
Sunday: 10am - 3:30pm

View Cart Go To Checkout